The Foolproof Way To Install Windows 98:
1. Get a Windows Startup Disk. To make one, on a running 98 system.
2. In your BIOS make sure your boot order is set to boot from floppy before the hard drive.
3. Insert Startup disk - start system - and answer 'Start Without CD-ROM Support' when prompted.
4. If you have multiple drives, you will want to make sure that you are on the correct current fixed disk drive, and switch it if necessary.
5. Create a Primary DOS partition and make it bootable.
6. Once FDISK is done it will tell you to reboot for changes.
7. Boot to BIOS, set the system boot order to boot from CD if you want to try a direct CD installation.
8. For CD Install: Insert Windows CD, remove floppy from drive and exit BIOS Good luck, system should start Windows install by formatting your drive.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น